I'm only getting a buzzing sound out of Maxi-Patch-AO. I can't even manipulate the waveform by moving the record. I got my Final Scratch 2 amp plugged in to the mixer and tables correctly. I have the outputs of the amp going into my line ins on my mixer and the thru outs of the amp going into the phono ins on the mixer (so I can spin vinyl if I want). I have the switches on the amp turned to phono ( I have tried line), and all I get is a buzzing sound. I have the driver set to Core-Audio Aggregate Device, and my input set to Aggregate device. I have not touched anything else. It won't let me choose the input source, output destination, or playthrough input fields. Am I suppose to download something? Why is it not working? Any suggestions? I didn't install any core audio drivers like the manual said, I just thought the one that came with the Macbook Pro was fine.
Oh yeah, my Aggregate Device is the same as core audio, it just has my other equipment listed under it (such as FS2 amp). I use Aggregate Device as my audio driver when I use Logic Pro with no problems. What should my IO mappings look like in Maxi? I have even changed the firewire cable.
All I get is a buzz...
-
- Site Admin
- Posts:1093
- Joined:Mon Jun 07, 2004 9:17 pm
Make sure the "audio thru" selection is NOT checke
In the audio file player sections of Maxi-Patch, there is the little pop-up menu which contains (6) important options. The second one from the top is "audio thru". Make sure that "audio thru" is NOT CHECKED. If "audio thru" is checked, then the control signal from the Ms Pinky vinyl will feed through to your outputs and cause that noise.