in ableton i have pinky pluggo setup and it sounds fine but the song keeps restarting after a few minutes (during a 7 or 8 minute song). it happens with different songs. the song keeps restarting at the beginning.
any ideas?
i noticed the pinky vinyl has what looks like separate song grooves like real vinyl. would this be restarting the song, hitting a new track on the timecode? why would the timecode only last a few minutes if this were the case?
thanks for any help you can give.
songs are restarting after a few minutes
-
- Posts:3
- Joined:Mon Feb 25, 2008 8:31 pm
-
- Site Admin
- Posts:1093
- Joined:Mon Jun 07, 2004 9:17 pm
-
- Posts:3
- Joined:Mon Feb 25, 2008 8:31 pm
<<< why no worky?
http://www.noisyChristians.com/Cstone06 ... ropout.bmp
http://www.noisyChristians.com/Cstone06 ... opout2.bmp
The second image was taken right when a restart occurred. Notice the spike in level, the red clip on the "led"'s.
I need this to work because even though i bought deckadance the sound has mad clicks and pops with that.
c'mon pinky, counting on you, and the O-RIG-I-NAL DL Pinkstah !
-
- Site Admin
- Posts:1093
- Joined:Mon Jun 07, 2004 9:17 pm
Snarky K's beware!
You also neglected to describe your complete system setup, specifically what Sound Card you're using. Please when posting a problem report on this forum include a COMPLETE description of your system. I am not a mind reader, and can't really help you solve your problem without all pertinent information.
-
- Posts:3
- Joined:Mon Feb 25, 2008 8:31 pm
of course, my bad,
i am using the behringer bcd 3000 as an audio interface and also trying the m-audio ozone as the audio interface and the same issue occurs. i have the latency set to about 20 milliseconds which should be absolutely the maximum needed, and i have tried all the buffer sizes, 64, 128, 256, 512, mb, etc.
pc specs -
intel pentium 4, 3 ghz, 2 gb corsair ram, win home server 2003, 4 x 320 gb ide hdd, audio interfaces plugged into the usb root, no irq conflicts.
ableton live 7, kore player, and many other audio programs run just fine on this system.
i am using the behringer bcd 3000 as an audio interface and also trying the m-audio ozone as the audio interface and the same issue occurs. i have the latency set to about 20 milliseconds which should be absolutely the maximum needed, and i have tried all the buffer sizes, 64, 128, 256, 512, mb, etc.
pc specs -
intel pentium 4, 3 ghz, 2 gb corsair ram, win home server 2003, 4 x 320 gb ide hdd, audio interfaces plugged into the usb root, no irq conflicts.
ableton live 7, kore player, and many other audio programs run just fine on this system.
-
- Site Admin
- Posts:1093
- Joined:Mon Jun 07, 2004 9:17 pm
Neither the bcd 3000 nor the m-audio ozone are among our recommended audio converters for use with Ms Pinky.
Please refer back to this page on our site:
http://www.mspinky.com/setup_slideshow/ ... Setup.html
I can't offer support to users who don't follow the recommendations for using the system.
Please refer back to this page on our site:
http://www.mspinky.com/setup_slideshow/ ... Setup.html
I can't offer support to users who don't follow the recommendations for using the system.