Folks-
I have an application in mind where I need to "scratch" five files simultaneously (not all my hands, of course!) via five continuous potentiometers and an ADC with which I can generate scaled values.
Is there a way to use MPTCFS~ without vinyl control to do this? Or with vinyl control with pot-controlled MSP signal generators to replicate the signal from the vinyl?
Or am I barking up the wrong tree?
Thanks,
apo
Replacing vinyl with pots?
-
- Site Admin
- Posts:1093
- Joined:Mon Jun 07, 2004 9:17 pm
Use MPFS~ instead
Don't forget about the good old MPFS~ object. It has the same file playback and scratching capabilities as MPTCFS~, but it is unencumbered by the vinyl tracking control code. It has two signal inputs. The left input is for a velocity signal that will set the rate of playback. Positive values dictate forward direction playback, negative signal values dictate reverse playback. So just generate any signal in max and connect it to the left input and you'll be scratching the file playback. To start, you can simply disconnect the right signal input which is for a position signal. To cue up your file just send it the cue messages as shown in the sample patch "MsPinky_absolute_mode".
Can we make it any easier for you??? I don't think so...
Can we make it any easier for you??? I don't think so...
-
- Posts:2
- Joined:Sun Jun 22, 2008 11:56 am
Hi everyone !
I have a question regarding the different objects which can perform scatching. I got this from an email earlier:
Any ideas ?
**Off Topic
Here is what i want to perform with that object.
I have a midi fader (value 0 - 127) and i want to use it for scratching. So middle Position (about value 64) should be the starting point. By moving the fader it should scratch back or forth.
**
Thanks to all helpers !
Naq
I have a question regarding the different objects which can perform scatching. I got this from an email earlier:
How can i "simulate" scatching within the MPTCFS object ?Just a note: starting with the new version (5) of Max/MSP, we are only really supporting one external object for Ms Pinky: "mptcfs~". It has
both the file scratching and the vinyl tracking code all rolled into one convenient package.
Any ideas ?
**Off Topic
Here is what i want to perform with that object.
I have a midi fader (value 0 - 127) and i want to use it for scratching. So middle Position (about value 64) should be the starting point. By moving the fader it should scratch back or forth.
**
Thanks to all helpers !
Naq