binky toy doesn't want to work
Posted: Tue Jan 22, 2008 3:39 pm
i' bought ms pinky a few years ago and never seemed to get it to work so i'm trying one more time.
so my set up goes a little something like this :
so i am using a
Machine Model: PowerBook G4 12"
System Version: Mac OS X 10.3.9
CPU Type: PowerPC G4 (1.1)
CPU Speed: 1.33 GHz
L2 Cache (per CPU): 512 KB
Memory: 1.256 MB
Bus Speed: 167 MHz
Boot ROM Version: 4.8.3f1
Maya 44
Rolls vp29 preamp
numark dmx 100 mixer
Ok and the set up goes a little bit like this: the phono jacks of the record deck go in the input of a rolls vp29.the output of which is connected to input 1-2 of my maya 44,then connected to my powerbook via usb.
The output 1-2 of the maya 44 then is connected to line 1 on the mixer.
My settings are:
2. Audio I/O Settings:
- Core Audio ON
- Input device group 1: Maya44 USB
- input source: In 1-2
- output destination: Out 1-2
- Input device group 2: Maya44 USB
- input source: in 3 -4
- output destination: Out 3-4
- Buffer size 64
Vinyl Demod settings:
- Group 1: mp-3 absolute
- cutoff 121
- cut -60
- thresh -44.94
- sharpness 1.085
- Group 2: mp-3 absolute
- cutoff 121
- cut -60
- thresh -44.94
- sharpness 1.085
3. Maya44 Control Panel settings:
-Monitor:
- In 1-2 MUTE
- In 3-4 MUTE
-Input:
- ~6% (Gang)
-Output:
- ~5% (Gang)
so i have gone through the binky toy manual but it all seems to be going wrong.
- for a start when i go on the core audio pop up menu i can only see core audio on and core audio off, no separate or combined
- then when i turn off group 1 in vinyl demod and put a normal record on i can hear nothing.
- when i put 3rd generation vinyl on, switch group 1 to absolute 3 and try and play a tune through group on files i get a funny nois if anything at all.
- can you someone send me a link to download another version of the binky toy ?
i know it,s all a bit of a mess but i have now bout 2 ms pinky sets as i had lost the first one but i really can not get it to work.please help
p.s. this week i should be upgrading to tiger and i also have the u46dj interface but that doesn't seem to work ether.
so my set up goes a little something like this :
so i am using a
Machine Model: PowerBook G4 12"
System Version: Mac OS X 10.3.9
CPU Type: PowerPC G4 (1.1)
CPU Speed: 1.33 GHz
L2 Cache (per CPU): 512 KB
Memory: 1.256 MB
Bus Speed: 167 MHz
Boot ROM Version: 4.8.3f1
Maya 44
Rolls vp29 preamp
numark dmx 100 mixer
Ok and the set up goes a little bit like this: the phono jacks of the record deck go in the input of a rolls vp29.the output of which is connected to input 1-2 of my maya 44,then connected to my powerbook via usb.
The output 1-2 of the maya 44 then is connected to line 1 on the mixer.
My settings are:
2. Audio I/O Settings:
- Core Audio ON
- Input device group 1: Maya44 USB
- input source: In 1-2
- output destination: Out 1-2
- Input device group 2: Maya44 USB
- input source: in 3 -4
- output destination: Out 3-4
- Buffer size 64
Vinyl Demod settings:
- Group 1: mp-3 absolute
- cutoff 121
- cut -60
- thresh -44.94
- sharpness 1.085
- Group 2: mp-3 absolute
- cutoff 121
- cut -60
- thresh -44.94
- sharpness 1.085
3. Maya44 Control Panel settings:
-Monitor:
- In 1-2 MUTE
- In 3-4 MUTE
-Input:
- ~6% (Gang)
-Output:
- ~5% (Gang)
so i have gone through the binky toy manual but it all seems to be going wrong.
- for a start when i go on the core audio pop up menu i can only see core audio on and core audio off, no separate or combined
- then when i turn off group 1 in vinyl demod and put a normal record on i can hear nothing.
- when i put 3rd generation vinyl on, switch group 1 to absolute 3 and try and play a tune through group on files i get a funny nois if anything at all.
- can you someone send me a link to download another version of the binky toy ?
i know it,s all a bit of a mess but i have now bout 2 ms pinky sets as i had lost the first one but i really can not get it to work.please help
p.s. this week i should be upgrading to tiger and i also have the u46dj interface but that doesn't seem to work ether.