I have RTFMed and still have issues ... can you help?
Posted: Wed Nov 15, 2006 11:59 pm
Hi, I have a MacBook 1.86/2gb mem/Motu Ultralite/behringer pre amp/vestax mixer and I'm using the Maxi AO patch.
I've got the Maxi Patch up and I'm running the Pinky record on one turntable only for now.
I've got this turntable set up on input 3-4 and output 3-4. I'm definitely getting a signal to the mixer, I can actually hear the Pinky vinyl coming thru the monitors (makes a wheeee-ooooooo noise), but it will not seem to control the MP3s I load into the patch, neither starting nor stopping them.
I've selected gen 4, not sure about using relative mode or absolute mode though I've tried both with the same results.
I've made sure to have vinyl controls set and the audio thru is turned off.
I tried setting the input/output channels to override and I assume that means to use the values at the bottom of the audio settings preferences instead of input 1/2 output 1/2?
Any ideas to try next?
I've got the Maxi Patch up and I'm running the Pinky record on one turntable only for now.
I've got this turntable set up on input 3-4 and output 3-4. I'm definitely getting a signal to the mixer, I can actually hear the Pinky vinyl coming thru the monitors (makes a wheeee-ooooooo noise), but it will not seem to control the MP3s I load into the patch, neither starting nor stopping them.
I've selected gen 4, not sure about using relative mode or absolute mode though I've tried both with the same results.
I've made sure to have vinyl controls set and the audio thru is turned off.
I tried setting the input/output channels to override and I assume that means to use the values at the bottom of the audio settings preferences instead of input 1/2 output 1/2?
Any ideas to try next?