45 RPM HQ-180 vinyl: Absolute mode not Working?

Topics regarding MsPinky's Maxi-Patch Application
Post Reply
trypset
Posts:49
Joined:Fri Dec 25, 2009 3:25 am
45 RPM HQ-180 vinyl: Absolute mode not Working?

Post by trypset » Sat Jan 02, 2010 1:08 am

Hello

XP64bit
Edirol FA-101
Gen 4 45RPM Vinyl
2 BBE FJB-200X Phono Preamps
technic 1200
shure whitelabel

Pinky VST
and
Maxi Patch AO

I can't get absolute to work, relative works fine. When I switch it to absolute the vinyl annimation goes crazy and the song position skips. I have tried ground to the preamp and to the mixer and the same thing happens.

thanks
dlpinkstah
Site Admin
Posts:1093
Joined:Mon Jun 07, 2004 9:17 pm

Post by dlpinkstah » Sat Jan 02, 2010 2:38 am

See this post and the answer:
http://www.mspinky.com/phpBB2/viewtopic.php?t=980

All you have to do is select "Torq" vinyl in the vinyl control settings.
trypset
Posts:49
Joined:Fri Dec 25, 2009 3:25 am

Post by trypset » Sat Jan 02, 2010 6:25 am

thanks that worked.

Now I am experiencing this on the ;eft deck. When the needle is in contact all works as intended. When I take the needle off the vinyl position moves slowly in reverese.......like its getting some of a signal, but it shouldn't be.

Could this be a grounding issue? Or something wrong with the table? The other deck is not doing this.
dlpinkstah
Site Admin
Posts:1093
Joined:Mon Jun 07, 2004 9:17 pm

Post by dlpinkstah » Sat Jan 02, 2010 9:35 pm

It could be that you just need to adjust the "Signal Power Thresh (dB)" and "Cutoff Sharpness" controls appropriately for your left deck. Also could be a signal quality problem, lack of proper grounding, etc....
trypset
Posts:49
Joined:Fri Dec 25, 2009 3:25 am

Post by trypset » Sun Jan 03, 2010 7:21 am

thanks, reset everything. Resaved. Closed. Reopened and now it worked flawlessly for 3 houes strait.

Awesome!!!

Whats the best way to sync with ableton? MIDI Out? Is anyone syncing and grabbing synced clips in ableton?
Post Reply