Normally my U46 is working fine. It's just in my patch in absolute mode I think, that there is no sound. Do I have to load the sound externally or what else could be the problem? Is it due to the mode or due to the drivers?
I got the asio 2.0 drivers (I don't think there were any updates, correct?).
Here's the patch, just in case.
thanks in advance
cubus
max v2;
#N vpatcher 196 35 1127 527;
#P origin -10 607;
#P toggle 768 210 15 0;
#P window setfont "Sans Serif" 9.;
#P window linecount 1;
#P message 786 210 73 9109513 highquality \$1;
#P message 746 295 39 9109513 adapt 1;
#P message 954 235 23 9109513 720;
#P message 918 233 28 9109513 1280;
#P message 545 436 68 9109513 fullscreen \$1;
#P toggle 528 436 15 0;
#P newex 570 411 35 9109513 sel 27;
#P newex 528 411 40 9109513 key;
#P newex 618 482 210 9109513 jit.window pworlds @noaccel @rect 0 0 1280 720;
#P newex 893 287 82 9109513 pak dim 1280 720;
#P number 127 345 35 9 0 0 0 139 0 0 0 221 221 221 222 222 222 0 0 0;
#P newex 603 268 40 9109513 gate 3;
#P button 582 294 15 0;
#P newex 601 315 47 9109513 random 8;
#P newex 412 376 62 9109513 prepend read;
#P number 305 300 35 9 0 0 0 139 0 0 0 221 221 221 222 222 222 0 0 0;
#P message 305 316 48 9109513 depth \$1;
#P newex 228 315 74 9109513 prepend prefix;
#P button 105 295 15 0;
#P newex 105 270 60 9109513 prepend set;
#P user dropfile 176 270 446 289 0 fold;
#P newex 228 297 54 9109513 route text;
#P user textedit 174 269 444 288 0 139 9 C:/movs/;
#P message 147 314 73 9109513 autopopulate 1;
#P user ubumenu 190 365 100 9109513 0 1 1 0;
#X add Bikes_final.mov;
#X add ice.mov;
#X add oth.mov;
#X add placeholder.mov;
#X add QT_FINALCUT_PRO_PAL.mov;
#X add trailer5.mov;
#X add V.mov;
#X add 3.mov;
#X prefix_set 0 1 C:/movs/ 1;
#P window linecount 3;
#P comment -26 516 363 9109513 'types': up to 64 file types may be entered \, to be used as filters to the populate message. By default \, no file types are filtered. Common file types are TEXT (text file) \, maxb (max binary) \, maxt (max text) and MooV (QT movie);
#P window linecount 4;
#P comment -26 466 335 9109513 'populate': if 'prefix' happens to be a valid folder path \, the populate message will cause the ubumenu to clear \, and fill itself with the contents of the folder referred to. If successful \, ubumenu will report the number of items added via its right outlet \, preceded by the symbol 'populate';
#P window linecount 2;
#P comment -26 440 283 9109513 'prefix' accepts a single argument \, which can be concatenated or prepended to the menu item text before output.;
#P window linecount 1;
#P comment -25 424 293 9109513 The ubumenu object accepts the following additional commands:;
#P comment 161 252 289 9109513 drag and drop a folder on the textedit to populate the ubumenu!;
#P newex 1084 114 27 9109513 -;
#P window setfont "Sans Serif" 20.;
#P flonum 940 104 105 20 0 0 0 139 0 0 0 156 179 255 222 222 222 0 0 0;
#P window setfont "Sans Serif" 9.;
#P newex 1075 56 40 9109513 t f b f;
#P newex 1072 84 27 9109513 float;
#P flonum 569 151 42 9 0 0 0 139 0 0 0 221 221 221 222 222 222 0 0 0;
#P flonum 626 152 39 9 0 0 0 139 0 0 0 221 221 221 222 222 222 0 0 0;
#P newex 618 182 27 9109513 * -1;
#P newex 589 86 27 9109513 + 1;
#P newex 589 63 30 9109513 <0> 150;
#P toggle 1043 301 15 0;
#P newex 321 -449 45 9109513 loadbang;
#P button 821 255 15 0;
#P newex 824 282 45 9109513 metro 25;
#P number 1145 658 45 9 0 0 0 139 0 0 0 221 221 221 222 222 222 0 0 0;
#P newex 1145 357 50 9109513 %;
#P newex 1214 450 21 9109513 t 1;
#P newex 1145 450 21 9109513 t 0;
#P newex 1145 424 79 9109513 split 0 600;
#P newex 1145 403 24 9109513 abs;
#P newex 1058 326 27 9109513 gate;
#P newex 1145 380 50 9109513 -;
#P newex 1140 148 50 9109513 - 155.;
#P newex 933 663 27 9109513 * 0.;
#P newex 1027 663 33 9109513 /;
#P message 973 454 35 9109513 set \$1;
#P message 941 346 50 9109513 frame \$1;
#P newex 984 698 65 9109513 prepend max;
#P number 906 401 49 9 0 77 3 139 0 0 0 221 221 221 222 222 222 0 0 0;
#P newex 1007 478 27 9109513 * 0.;
#P newex 1008 503 27 9109513 /;
#P newex 1058 697 60 9109513 prepend set;
#P newex 1090 218 27 9109513 gate;
#P message 1049 266 44 9109513 time \$1;
#P newex 1142 172 55 9109513 * 0.01161;
#P newex 1142 193 27 9109513 * 0.;
#P newex 688 579 407 9109513 route read duration framecount looppoints time fps moviedim timescale;
#P comment 1161 128 135 9109513 vinyl position signal in;
#B frgb 248 6 0;
#P window linecount 2;
#P comment 1012 621 203 9109513 calculate the framecount by mulitplying fps by (time/timescale);
#P window linecount 1;
#P comment 1036 502 100 9109513 divide by timescale;
#P comment 1035 480 100 9109513 time X fps;
#P message 850 -42 50 9109513 rate \$1;
#P button 826 306 15 0;
#P newex 838 359 55 9109513 jit.qt.movie;
#P message 45 -541 14 9109513 4;
#P newex 245 22 107 9109513 prepend fat_resample;
#P toggle 245 4 15 0;
#P comment 263 6 117 9109513 turn on/off fat resample;
#P newex 245 -17 76 9109513 prepend looped;
#P toggle 245 -35 15 0;
#P newex 245 -56 80 9109513 prepend reverse;
#P toggle 245 -74 15 0;
#P newex 245 -94 83 9109513 prepend play_file;
#P toggle 245 -112 15 0;
#P newex 27 -388 112 9109513 prepend vinyl_control;
#P toggle 27 -406 15 0;
#P newex 26 -309 95 9109513 prepend audio_thru;
#P toggle 26 -327 15 0;
#P newex 26 -348 128 9109513 prepend file_position_out;
#P toggle 26 -365 14 0;
#P newex 27 -429 108 9109513 prepend vinyl_demod;
#P toggle 27 -447 15 0;
#P newex 27 -470 152 9109513 prepend absolute_mode_control;
#B color 12;
#P toggle 28 -497 25 0;
#P newex 27 -520 136 9109513 prepend control_generation;
#P newex 561 -336 33 9109513 / 50.;
#P flonum 561 -317 35 9 0. 10. 3 139 0 0 0 221 221 221 222 222 222 0 0 0;
#P user uslider 639 -399 13 44 101 1 0 0;
#P window linecount 3;
#P comment 657 -396 100 9109513 sets the pitch of playback \, 1. = no pitch adjustment;
#P window linecount 1;
#P comment 47 -445 207 9109513 turn on/off vinyl control signal demodulator;
#P message 914 -522 14 9109513 1;
#P newex 914 -543 45 9109513 loadbang;
#N vpreset 1;
#X append 1 2 9 -214 58 gain~ list 124 10. \; 13 -241 57 number~ list 1. \; 16 -93 850 number~ list 0. \; 17 -277 728 number~ list 0. \; 18 -5 846 number~ list 0. \; 22 -536 477 uslider;
#X append 1 2 int 24 \; 23 -477 477 flonum float -36. \; 24 -530 699 uslider int 39 \; 25 -466 734 flonum float 2. \; 30 -471 553 uslider int 110 \; 31 -389 552 flonum float 1. \; 46 -399 639;
#X append 1 2 uslider int 43 \; 47 -317 561 flonum float 0.77 \;;
#P preset 914 -501 47 27;
#P user ezdac~ 32 78 76 111 0;
#P comment 29 63 74 9109513 DSP ON/OFF;
#P message 72 -8 27 9109513 read;
#P window linecount 4;
#P comment 25 -69 71 9109513 Select a .WAV \, .AIFF \, or .mp3 audio file to play..;
#P window linecount 1;
#P newex 99 28 74 9109513 s file_settings;
#P comment 263 -72 100 9109513 plays file in reverse;
#P newex 220 -306 74 9109513 r file_settings;
#P comment 44 -405 148 9109513 turn on/off vinyl control of file;
#P newex 552 -408 33 9109513 / 10.;
#P flonum 552 -389 35 9 0 0 0 139 0 0 0 221 221 221 222 222 222 0 0 0;
#P user uslider 553 -471 13 44 200 1 -100 0;
#P window setfont "Sans Serif" 12.;
#P window linecount 2;
#P message 245 49 102 9109516 query vinyl_position;
#B color 4;
#P window setfont "Sans Serif" 9.;
#P window linecount 6;
#P comment 716 -545 184 9109513 Cutoff Sharpness: sets how quickly the dropout occurs when signal falls below the Sig Power Thresh setting. A value of approx. 1. provides reasonably smooth sounding dropout when record speed is very low.;
#P window linecount 5;
#P comment 493 -540 202 9109513 Sig Power Thresh (dB): adjust according to the level of the signal from your turntable. Above a certain point \, notice how playback volume drops. Set this control to about 6 dB below the level at which dropout occurs.;
#P window linecount 1;
#P newex 699 -466 32 9109513 / 20.;
#P flonum 734 -466 35 9 0 0 0 139 0 0 0 221 221 221 222 222 222 0 0 0;
#P user uslider 699 -530 13 44 100 1 1 0;
#P flonum 477 -477 35 9 0 0 0 139 0 0 0 221 221 221 222 222 222 0 0 0;
#P user uslider 477 -536 13 41 61 1 -60 0;
#P comment 64 -538 316 9109513 set the generation number of the Ms Pinky control signal in use: 1-5.;
#P window setfont "Sans Serif" 10.;
#P comment 191 87 198 9109514 the position stamp is sent out right outlet;
#P window setfont "Sans Serif" 9.;
#P window linecount 2;
#P comment 54 -499 397 9109513 absolute_mode_control 1: both absolute and relative position information is calculated \, 0: only relative position information (signed velocity & power) is calculated;
#P window setfont "Sans Serif" 36.;
#P user number~ 846 -5 1144 40 36 139 3 2 0. 0. 0 0. 250 0. 0 0 0 255 189 156 222 222 222 0 0 0;
#P window setfont "Sans Serif" 14.;
#P user number~ 728 -277 833 -258 14 139 3 2 0. 0. 0 0. 250 0. 0 0 0 221 221 221 222 222 222 0 0 0;
#P window setfont "Sans Serif" 36.;
#P user number~ 850 -93 1114 -48 36 139 3 2 0. 0. 0 0. 250 0. 0 0 0 221 221 221 222 222 222 0 0 0;
#P window setfont "Sans Serif" 9.;
#P window linecount 1;
#P newex 57 -280 45 9109513 loadbang;
#P message 57 -260 17 9109513 1.;
#P user number~ 57 -241 96 -226 9 139 1 1 0. 0. 0 1. 250 0. 0 0 0 221 221 221 222 222 222 0 0 0;
#P newex 111 -42 48 9109513 dac~ 1 2;
#P newex 149 -68 27 9109513 *~;
#P newex 111 -68 27 9109513 *~;
#P user gain~ 58 -214 24 100 158 0 1.071519 7.94321 10.;
#P newex 133 -307 72 9109513 adc~ 1 2;
#P newex 110 -240 336 9109513 MPTCFS~;
#P window linecount 4;
#P comment 570 -471 100 9109513 sets the rate of playback for when the file is playing without vinyl control;
#P window linecount 1;
#P comment 42 -364 283 9109513 output the current file play position instead of vinyl position;
#P comment 43 -326 162 9109513 turn on/off audio input monitoring;
#P comment 263 -111 114 9109513 start/stop file playback;
#P comment 263 -33 109 9109513 turn on/off file looping;
#P window setfont "Sans Serif" 12.;
#P window linecount 3;
#P comment 1160 -13 120 9109516 position signal stamp Side A 1 Side B 65536;
#B color 1;
#P window setfont "Sans Serif" 9.;
#P comment 644 208 100 9109513 If signal differs more than 150 --> bang 1 (if needle is skipped);
#P connect 54 0 55 0;
#P connect 56 0 57 0;
#P connect 69 0 49 0;
#P connect 50 0 51 0;
#P connect 52 0 53 0;
#P connect 58 0 59 0;
#P connect 102 0 50 0;
#P connect 102 0 69 0;
#P connect 15 0 14 0;
#P connect 14 0 13 0;
#P connect 13 0 9 0;
#P connect 29 0 36 0;
#P connect 38 0 36 0;
#P connect 63 0 36 0;
#P connect 65 0 36 0;
#P connect 68 0 36 0;
#P connect 61 0 36 0;
#P fasten 125 0 126 0 181 291 167 291 167 266 110 266;
#P connect 126 0 127 0;
#P connect 8 0 7 0;
#P connect 34 0 7 0;
#P hidden connect 49 0 7 0;
#P hidden connect 51 0 7 0;
#P hidden connect 53 0 7 0;
#P hidden connect 59 0 7 0;
#P hidden connect 55 0 7 0;
#P hidden connect 57 0 7 0;
#P connect 7 0 10 0;
#P connect 10 0 12 0;
#P connect 132 0 135 0;
#P connect 9 0 10 1;
#P connect 7 1 11 0;
#P connect 11 0 12 1;
#P connect 9 0 11 1;
#P fasten 127 0 123 0 110 314 167 314 167 267 179 267;
#P fasten 126 0 123 0 110 291 167 291 167 266 179 266;
#P connect 8 1 7 1;
#P connect 135 0 121 0;
#P fasten 128 0 121 0 233 336 195 336;
#P connect 122 0 121 0;
#P fasten 129 0 121 0 310 336 195 336;
#P fasten 123 0 124 0 179 291 233 291;
#P connect 124 0 128 0;
#P connect 23 0 7 2;
#P connect 102 0 60 0;
#P connect 60 0 61 0;
#P connect 62 0 63 0;
#P connect 102 0 64 0;
#P connect 64 0 65 0;
#P connect 67 0 68 0;
#P connect 25 0 7 3;
#P connect 130 0 129 0;
#P connect 31 0 7 4;
#P connect 121 1 131 0;
#P connect 47 0 7 5;
#P connect 22 0 23 0;
#P fasten 139 0 140 0 575 433 533 433;
#P fasten 140 0 141 0 544 451 544 436;
#P connect 30 0 32 0;
#P connect 32 0 31 0;
#P connect 46 0 48 0;
#P connect 48 0 47 0;
#P connect 106 0 111 0;
#P connect 104 0 105 0;
#P fasten 138 0 139 0 569 428 569 413;
#P connect 109 0 104 0;
#P connect 106 0 104 0;
#P connect 134 0 133 0;
#P connect 114 0 107 0;
#P connect 107 0 108 0;
#P connect 108 0 106 0;
#P connect 133 0 132 0;
#P connect 105 0 134 0;
#P connect 106 1 109 0;
#P connect 70 0 137 0;
#P connect 141 0 137 0;
#P connect 114 0 106 1;
#P connect 106 1 110 0;
#P connect 105 0 134 1;
#P connect 70 1 77 0;
#P connect 24 0 26 0;
#P connect 7 3 17 0;
#P connect 26 0 25 0;
#P connect 146 0 145 0;
#P connect 102 0 101 0;
#P connect 101 0 100 0;
#P connect 100 0 71 0;
#P connect 131 0 70 0;
#P connect 87 0 70 0;
#P connect 80 0 70 0;
#P connect 72 0 70 0;
#P connect 71 0 70 0;
#P connect 136 0 70 0;
#P connect 145 0 70 0;
#P connect 144 0 70 0;
#P connect 7 4 18 0;
#P connect 7 2 16 0;
#P connect 16 1 72 0;
#P hidden connect 88 0 85 0;
#P hidden connect 86 0 85 0;
#P connect 42 0 43 0;
#P connect 43 0 41 0;
#P connect 142 0 136 1;
#P connect 77 1 90 0;
#P connect 115 0 114 0;
#P hidden connect 85 0 87 0;
#P connect 77 5 90 1;
#P connect 143 0 136 2;
#P connect 83 0 88 0;
#P connect 89 0 86 0;
#P connect 77 4 84 0;
#P connect 84 0 83 0;
#P connect 77 5 84 1;
#P connect 77 7 83 1;
#P connect 90 0 89 0;
#P connect 102 0 103 0;
#P connect 81 0 80 0;
#P connect 77 7 89 1;
#P connect 103 0 93 0;
#P connect 89 0 82 0;
#P connect 113 1 112 0;
#P connect 18 1 113 0;
#P connect 78 0 93 1;
#P connect 113 2 115 0;
#P connect 113 0 112 1;
#P connect 97 0 81 0;
#P connect 96 0 81 0;
#P connect 112 0 115 1;
#P connect 78 0 81 1;
#P connect 18 1 91 0;
#P connect 91 0 79 0;
#P connect 79 0 78 0;
#P connect 93 0 98 0;
#P connect 98 0 92 0;
#P connect 92 0 94 0;
#P connect 94 0 95 0;
#P connect 95 0 96 0;
#P connect 82 0 99 0;
#P hidden connect 77 7 78 1;
#P connect 77 1 98 1;
#P connect 77 4 92 1;
#P connect 77 7 95 2;
#P connect 95 1 97 0;
#P pop;
- It may not be the real thing, but at least you're playing with vinyl..... Ms Pinky Support Forum Soundcard/Audio Converter Discussion General Soundcard/Audio Converter Forum
- Search
-
- It is currently Fri Nov 08, 2024 1:26 am
- All times are UTC
no output with U46 with asio drivers
A Forum for topics relating to the soundcard/ audio converter that is used with MsPinky
Return to “General Soundcard/Audio Converter Forum”
Jump to
- General Discussion
- ↳ General And Misc. Topics
- Soundcard/Audio Converter Discussion
- ↳ General Soundcard/Audio Converter Forum
- Turntable/Cartridge/Stylus/Phono Preamp Discussion
- ↳ The Turntable/Cartridge/Stylus/Phono Preamp Forum
- CDJ Control
- ↳ The Compact Disc DJ Control Forum
- Computer/CPU/RAM, etc. Discussion
- ↳ The Computer/CPU/RAM, etc. Forum
- Max/MSP + MsPinky Discussion
- ↳ The Max/MSP + MsPinky = LUV Forum
- Artistic Endeavors
- ↳ The Artist's Corner
- Vinyl-Controlled Software
- ↳ Pinky Pluggo
- ↳ Pinky VST
- ↳ The BinkyToy Application
- ↳ The Maxi-Patch Application
- ↳ Other Apps using the MsPinky Vinyl Control Interface