Setup:
G4 Powerbook
1.67 GHz
2 GB Ram
OSX Tiger 10.4.11
Totally clean install, no other apps installed apart from the Maxi Patch software. All updates downloaded and installed for OSX.
Maxi Patch Ver: 3.7.1
Dashboard disabled.
So mp3 mixing is great. No problems. Add a video and I get frame rates of 1-7 FPS even when I just play it. Tried it with separate audio as well. Same deal. All audio is playing fine and any situation.
Max Window:
js:error calling function update_indicator
js:Pinky_waveformjs: Javascript InternalError: too much recursion, line 455
This seems to be the most recurring message
In activity monitor its using between 250-340 of my real memory.
Any clues as to whats wrong would be most appreciated.
Zac
1 frame per second
-
- Posts:11
- Joined:Thu Jun 11, 2009 5:16 am
-
- Site Admin
- Posts:1093
- Joined:Mon Jun 07, 2004 9:17 pm
-
- Posts:11
- Joined:Thu Jun 11, 2009 5:16 am
-
- Site Admin
- Posts:1093
- Joined:Mon Jun 07, 2004 9:17 pm
Three things:
1) What are the pixel dimensions of your videos? Using videos with smaller dimensions (like 320 X 240) will give you faster framerates.
2) Use the OpenGL video mixing modes. In the output video mix control panel (top, center) make sure your mix mode is one with the "-GL" suffix. Those mixes are done on your graphics accelerator card and this takes a load off the CPU.
3) make sure the "bri_con_sat" and "zoom/rotate" check-boxes are un-checked (disabled).
Bottom line: the G4 machines are really slow, and there's nothing we can do about that.
1) What are the pixel dimensions of your videos? Using videos with smaller dimensions (like 320 X 240) will give you faster framerates.
2) Use the OpenGL video mixing modes. In the output video mix control panel (top, center) make sure your mix mode is one with the "-GL" suffix. Those mixes are done on your graphics accelerator card and this takes a load off the CPU.
3) make sure the "bri_con_sat" and "zoom/rotate" check-boxes are un-checked (disabled).
Bottom line: the G4 machines are really slow, and there's nothing we can do about that.

-
- Posts:11
- Joined:Thu Jun 11, 2009 5:16 am
-
- Posts:11
- Joined:Thu Jun 11, 2009 5:16 am