mspinky.com

Posted: **Mon Mar 07, 2011 5:55 pm**

is there any way to cut less of the low end in m4l?
i can't seem to ballance it right. it's either noisy when the
vinyl isn't spinning (white noise) or paper thin and a bit squarish (as if the cut is too high)

Posted: **Wed Mar 16, 2011 11:22 pm**

new stylus made all the difference. enabled me to reduce the cut.

Posted: **Thu Mar 17, 2011 5:00 am**

Yeah, that makes sense. A stylus will definitely wear out over time. Thanks for clarifying.