Playing original vinyl with binkytoy

Topics regarding MsPinky's BinkyToy Application
Post Reply
Joined:Wed Jun 22, 2005 6:06 am
Playing original vinyl with binkytoy

Post by SD_BaLLaH » Sun Oct 15, 2006 5:56 am

I've used maxipatch and there was a feature where I can play normal vinyl in a direct mode. Is there any way to do this with Binkytoy cuz I would like to play normal records and use Binkytoy at the same time.
Site Admin
Joined:Mon Jun 07, 2004 9:17 pm

Turn Vinyl Demod "OFF"

Post by dlpinkstah » Sun Oct 15, 2006 5:00 pm

Under the Vinyl Demod tab, select "Group1 : OFF" or "Group2 : OFF" depending on which input you want to play your normal music record through. Selecting "OFF" for either group's vinyl demod will allow the incoming signal to pass through to the output.

To set the volume level for the incoming music record, go under the "Group 1 In" or "Group 2 In" tabs and set the volume levels appropriately. You can also add effects that will apply only to the incoming music record.

To switch back to playing virtual Ms Pinky control vinyl, just go back under the vinyl demod tab and select the proper control generation again from the pop-ups. You don't have to turn the volume down under "Group1/2 In".
Post Reply