Input Config: 3-4, 7-8 stereo-in. Usually 96kHz, tried 48kHz and 44.1kHz too. MP-5 Absolute demod.
Output Config: 3-4, 5-6 out.
Under Maxipatch-AO everything works perfectly, but under BinkyToy I get skipping. Every second or so it skips forward a fraction of a second (sounds wicked on glitch, makes it impossible to mix)
I've tried different sample rates, I've tried different inputs. I've tried selecting all the different generations of MsPinky vinyl. Changing generations away from 5 obviously didn't help, but I'd hit the try-anything stage. Strangely enough the only thing I found that fixed it was to go into the vinyl demodulation tab, hit the dropdown for vinyl generation. While the dropdown was open the skipping stopped. I could cue, scratch, change pitch, everything was perfect. Of course as soon as closed the dropdown it started skipping again. It skips in relative and absolute mode. It skips in the wrong generation of vinyl (though the speed or direction will be wrong all over, obviously).
Reading the manual isn't helping me, but then it is getting late
Any ideas?
